The 404 is the amplifier that established Moonriver, and the model the Reference was built on rather than replaced by. It gives the same 50 watts per channel, the same 10 Hz to 50 kHz response and the same feature set, with 57,000uF of capacitance rather than the Reference's 107,000uF.
That difference in supply is what separates them, and it shows up under load rather than at low levels. In a normal room with a reasonably efficient loudspeaker, many owners will never ask the standard 404 for more than it has.
Moonriver Audio builds in Malmo, Sweden. The company makes three products and does so without surface mount components anywhere in the analogue signal path, using through hole construction that costs more and demands a more careful board layout. The build is otherwise the same: relay input switching, the ALPS blue volume potentiometer, a soft start circuit on a 30 amp relay, and through hole construction throughout the analogue path.
The tape monitor loop and stereo mono switch are both present, as on the Reference. The 404 is modular. A phono stage and a USB or S/PDIF converter can be fitted at purchase or at any point afterwards, and the converter module can itself be upgraded later. Nothing has to be decided on day one. If you are choosing between the two, we would suggest starting here unless your loudspeakers are genuinely difficult, and we are happy to advise.
The phono stage is an option, selected above. The amplifier can be supplied bare, with the moving magnet module at 495 euro, or with the moving magnet and moving coil module at 599 euro. On the MM/MC module gain is set by DIP switches on the board and the moving coil load is changed by swapping the standard 100 ohm input resistor, neither of which needs soldering. Fitting the stage inside the amplifier amplifies the cartridge signal before it travels down an interconnect, which is where a signal measured in microvolts is most vulnerable, and it saves the cost of a separate chassis and a pair of cables. The module can also be fitted later, so it does not have to be decided now.
Main features
- 50 watts per channel into 8 ohms
- 57,000uF total capacitance
- Five separate power supplies, each with overload protection
- Relay input switching and ALPS blue volume control
- Soft start circuit on a 30 amp relay
- Tape monitor loop for inserting room correction or other line devices
- Stereo and mono switch for monaural pressings
- Available bare, with MM phono at 495 euro, or with MM/MC phono at 599 euro
- Optional USB or S/PDIF DAC module, fitted at any time
Technical specifications
| Type | Integrated amplifier |
|---|---|
| Maximum Output Power | 50 W per channel into 8 ohms |
| Frequency Response | 10 Hz to 50 kHz |
| Total Harmonic Distortion | 0.05% |
| Signal to Noise Ratio | 85 dB, line |
| Total Capacitance | 57,000uF |
| Inputs | 5 line, two of which can be occupied by phono and USB DAC modules, plus 1 tape loop |
| Outputs | 2 preamplifier out, 1 record out |
| Volume Control | ALPS blue potentiometer |
| Idle Consumption | 22 W |
| Dimensions (W x D x H) | 430 x 390 x 135 mm |
| Weight | 12 kg |
| Construction | Through hole, no surface mount in the analogue signal path |
| Phono Options | None, MM module at 495 euro, or MM/MC module at 599 euro |
| Origin | Built in Malmo, Sweden |
| Supplied | Each |
Buying from Dreamcrest Audio
Dreamcrest Audio Fidelity Ltd is an authorised Moonriver Audio dealer with around twenty years in the high end audio business. Everything is supplied new and boxed with full manufacturer warranty, and we can arrange a demonstration and system matching advice before you commit. Use the Enquire button for current availability, delivery time and a firm quotation.









Reviews
There are no reviews yet.