The F502S is the full sized floorstander of the F500S Series. A 200mm IsoFlare point source driver is paired with a second 200mm bass unit, giving a genuine 30Hz low end and 91dB sensitivity from a cabinet that is still only 300mm wide.
The F500S Series builds on the award winning F500 range with a revised IsoFlare point source driver, an improved termination panel and an upgraded crossover, housed in a square high density fibreboard cabinet with real wood veneer. Three finishes are offered so the speaker can be matched to the room rather than the other way round.
IsoFlare places the tweeter at the acoustic centre of the bass and midrange cone, so the whole frequency range radiates from a single point. The practical result is that the speaker sounds the same across a wide listening area and is far less fussy about exact seating position. BassTrax takes the output of the downward firing port and turns it through a Tractrix profile diffuser into a 360 degree wavefront. Bass reaches the listener evenly rather than firing at one wall, which makes placement close to a boundary much less troublesome.
This is the model to reach for in a larger living room, or where a subwoofer would otherwise be needed. An amplifier of 30 to 180 watts is the recommended range. The price shown is per pair.
Main features
- Two and a half way floorstanding design
- 200mm IsoFlare point source driver with 25mm magnesium dome tweeter
- Additional 200mm bass driver
- BassTrax Tractrix diffuser on the downward firing port
- Bass extension to 30Hz without a subwoofer
- Sensitivity of 91dB
- Rear presence control, plus or minus 3dB from 2.5kHz to 5kHz
- Black Oak, Natural Walnut or Piano Gloss Black
- Price per pair
Technical specifications
| System type | 2.5 way, downwards firing port, with BassTrax Tractrix diffuser |
|---|---|
| Recommended amplifier power | 30 to 180 watts RMS |
| Continuous power handling | 90 watts RMS |
| Sensitivity (2.83V at 1m) | 91dB |
| Nominal impedance | 8 ohms |
| Frequency response (-6dB typical in room) | 30Hz to 34kHz |
| Drive unit complement | 1 x 200mm IsoFlare bass / mid with 25mm magnesium dome compression tweeter, 1 x 200mm bass |
| Crossover frequency | 250Hz and 1.7kHz |
| Crossover type | 2nd order low pass, 1st order high pass |
| System adjustments | Presence control plus or minus 3dB (2.5 to 5.0kHz) |
| Dimensions HxWxD | 1112 x 300 x 382mm (43.8 x 11.8 x 15.0 in) |
| Net weight each | 28.5kg (62.8 lbs) |
| Finishes | Black Oak, Natural Walnut, Piano Gloss Black |
Buying from Dreamcrest Audio
Dreamcrest Audio Fidelity Ltd is an authorised Fyne Audio dealer with around twenty years in the high end audio business. Every unit is supplied new and boxed with full manufacturer warranty, and we can arrange a demonstration and system matching advice before you commit. Use the Enquire button for current availability, delivery time and a firm quotation.









Reviews
There are no reviews yet.