Exposure VXN 2 Way Active Crossover

€2,449 inc. VAT (€2,058 excl. VAT)

Two way active crossover built to match a specific loudspeaker, powered by the VXN Power Supply.

Available to order

We confirm the exact delivery time in writing before you pay.

Get notified when back in stock

SKU: EXPOSURE-VXNXO2 Category: Tag: Brand:
Enquire about this product
  • Authorised dealer - full manufacturer warranty
  • 20 years in high-end audio - listening room in Nicosia
  • Free insured FedEx shipping on orders over 80 euro
  • 14-day returns
  • Rated for service on Trustpilot

The VXN 2 Way Active Crossover replaces the passive crossover inside a two way loudspeaker with an active filter placed ahead of the power amplifiers. Each driver then gets its own amplifier channel working into a simple load, which removes the losses and the phase behaviour of a passive network from the signal path.

The result in a well set up system is a marked gain in clarity and dynamic freedom, particularly through the bass and lower midrange where passive crossover components do the most damage. Distortion measures below 0.005% on every output and the signal to noise ratio exceeds 100 dB.

Please note two conditions before ordering. Each crossover is built to match a specific loudspeaker brand and model, so the loudspeaker must be specified at the time of order, and the unit is powered exclusively by an Exposure VXN Power Supply which is sold separately. Please contact us to discuss your loudspeakers before ordering.

Main features

  • Two way active crossover replacing the loudspeaker's passive network
  • Built to match a specific loudspeaker brand and model, specified when ordering
  • Treble section with a 12 dB to 18 dB per octave high pass filter
  • Bass section with a 6 dB to 18 dB per octave low pass filter
  • Distortion below 0.005% on every output
  • Signal to noise ratio better than 100 dB, ref. 2 V output
  • Treble level adjustable from minus 0.5 dB to minus 6.5 dB via internal DIP switches
  • Requires a VXN Power Supply, sold separately

Technical specifications

ConfigurationTwo way active crossover, roll off rates and levels matched to the loudspeaker in use
Treble Section12 dB to 18 dB per octave high pass filter
Bass Section6 dB to 18 dB per octave low pass filter
Maximum Output Level7 V RMS on any output
Bass Output DistortionLess than 0.005% at 100 Hz, 2 V output
Treble Output DistortionLess than 0.005% at 10 kHz, 2 V output
Signal to Noise RatioGreater than 100 dB, ref. 2 V output
Output Impedance50 ohms at 1 kHz, any output
Level SettingsInternal DIP switches, minus 0.5 dB to minus 6.5 dB
Power RequirementPowered exclusively by an Exposure VXN Power Supply
Power ConsumptionLess than 10 W
Dimensions (W x H x D)218 x 90 x 348 mm
Net Weight2 kg
Gross Weight3 kg
FinishBlack

Buying from Dreamcrest Audio

Dreamcrest Audio Fidelity Ltd is an authorised Exposure dealer with around twenty years in the high end audio business. Every unit is supplied new and boxed with full manufacturer warranty, and we can arrange a demonstration and system matching advice before you commit. Use the Enquire button for current availability, delivery time and a firm quotation.

Component Type

Reviews

There are no reviews yet.

Be the first to review “Exposure VXN 2 Way Active Crossover”

Your email address will not be published. Required fields are marked *

×





0
0
Your Cart
Your cart is emptyReturn to Shop